For incredible power in a compact unit, look no further than the Ashdown Rootmaster EVO 800 Bass Amplifier Head. Ashdown spent a considerable length of time consulting with professional musicians to perfect these models, and you can rest assured that whatever style of music you play, the new Rootmaster EVO range has something to meet everyone's demands.
Power and efficiency
The Rootmaster EVO 800 bass amp head is a complete powerhouse. Built to withstand the rigours of the road and carrying it off with effortless style, the new lightweight and slimline enclosure houses a tonal monster that is desperate to be explored.
The front panel is home to an impressive array of controls that put a huge amount of power at your fingertips. At your disposal is an intricately designed 5-band EQ section that allows you to sculpt and craft your tone to suit the bass guitar you're playing, the environment you're playing in and to fit perfectly alongside the other musicians you're playing with.
The simple one-knob compression system allows you to squeeze your signal to get a tightly clipped and snappy response, or a thick, saturated rumble with an incredibly warm tone. The Drive control gives a sweetly overdriven tube-emulated sizzle that can inject a little grit into your signal or full on hot overdrive.
The FS-2 output allows you to control the Drive and Sub Harmonic effects via an external optional footswitch, giving you greater freedom in how you control the amp. effects
The Class-D power section runs highly efficiently, which also contributes to the lower weight of the overall head and allows it run cool in any environment meaning you get more musical volume whilst using less power.
The rear panel is home to the FX Loop Send and Return connections, allowing you to set up external effects pedals free from the pre and post amp stages to give you greater control over the exact effects you want to use.
The D.I. XLR output delivers a balanced signal, perfect if you want to send a feed straight into a mixing desk for recording, or a live sound desk during a gig. Not only that but a unique Speak On speaker output jack allows you to connect into a live PA desk where an XLR jack isn't available so that all bases are covered.
This is one compact amplifier that packs tremendous punch and coupled with one of the purpose built Ashdown cabs or your existing suitable cab, the Ashdown Rootmaster EVO 800 Bass Amplifier Head will be a force to be reckoned with.
Manufacturer Ashdown Model Rootmaster EVO 800 Bass Amplifier Head Dimensions (H x W x D) 86 x 314 x 235mm Weight 4kg Output Power 800 Watts RMS Power Handling 115 - 230 Volts Speaker Outputs 2 x Speakon Frequency Response -3db at 17hz and 30khz High Instrument Input Impedance - 3.9M Ohm Input range 150mv to 20v p - p Low Instrument Input Impedance - 1M Ohm Input range 150mv to 40v p - p Line Input Impedance 10k Ohms, input range 300mV - 40V p-p DI Output 600 Ohm balanced / Level -20dBu nominal Tuner Output Impedance 22k Ohms / Level 0dBu nominal Impedance Minimum 4 Ohm Signal to noise Better than 80dB (EQ flat) EQ Bass +/- 15db @ 100hz. Lo Mid +/- 15db @ 340hz. Mid +/- 15db @ 660hz. Hi Mid +/- 15db @ 1.6Khz. Treble +/- 15db @ 7khz shelving Effects Send Impedance 22k Ohm / Level 0dBu Nominal Effects Return Impedance 22k Ohm / Level 0dBu Nominal Distortion Less than 0.5% THD Connectivity Input, FS-2 Out, FX Send, FX RTN, Line In, Speaker Out, DI Out (XLR) Controls Input, Comp, Drive, Sub, Bass, 240Hz, Middle, 1K5Hz, Treble, Output, Line Mix, Shape, EQ (In/Out), Comp (In/Out), Drive (In/Out)
- Customer Reviews
Write Your Own Review