01925 582 420

eStudio Project 2 Monitor Speaker 2.1 System

Stock code: 92847
eStudio Project 2 Monitor Speaker 2.1 System

Rollover image to zoom in View large Image

Features

  • 2.1 Stereo monitor speakers with sub
  • Perfect for use with computers
  • 2x Phono, 2x Jack & Mini-Jack inputs
  • 10w per side, 20w sub
  • Great for starting out with synths and computer music production

eStudio Project 2 Monitor Speaker 2.1 System brings computer audio (and sound from other devices) to life with very wide frequency response, simple setup and external sub-woofer for extended bass. Project 2 speakers output 50Hz - 20kHz of audio through a sub-woofer, mid-woofer and tweeter combination, which means you get greater clarity at all ends of the audo-spectrum, making listening a pleasure, and enabling you to hear bass frequencies with much greater definition. The input connections are RCA phono, TRS jack and stereo mini-jack, which means you can plug in a wide range of different audio devices, without having to use unneccessary adaptors. These speakers bridge the gap between studio speakers and multimedia speakers, offering an affordable solution for bedroom studios and a great setup for listening to music from any audio devices. Plug a synth, keyboard, stage piano, ipod, audio interface or any other audio device into this speaker system.

Size No
Storage Type No
Power No
Type2.1 Powered Speaker System
Woofer5.25-inch Magnetically Shielded Paper Cone
Mid-Woofer3-inch Magnetically Shielded Paper Cone
Tweeter1.5-inch Magnetically Shielded Paper Cone
Frequency Response 50Hz-20KHz
Crossover Frequency200Hz, 6.0KHz
Dynamic Power Subwoofer: 25 watts RMS 8OHM, Satellites: 10 watts RMS 4 OHM per channel
S/N Ratio 85dB typical A-weighted
Input RCA Stereo Line1 input Connectors 1/8” Aux Stereo Line2 input
Output Connectors2 x 1/8" Aux Mono output
PolarityPositive signal at + input produces outward LF cone displacement
Input Impedance10K ohms
Input Sensitivity 100mV pink noise input produces 90dBA output SPL at one meter with volume control at maximum
Protection Output current limiting, over temperature, subsonic filter, external main fuse
IndicatorPower on/off indicator on front panel
Power Requirements220-240V~50/60Hz
Dimensions225mm(H) 195mm(W) 300mm(D) Satellites: 195mm(H) 130mm(W) 150mm(D)
Net Weight5.9kgs

  • Very good

    Overall Rating
    Posted on 03/02/2013 by

    I purchased these speakers for use with a Korg sp170s piano and I am very pleased with the extra warmth and depth it has brought to the bass notes. A very big improvement on the built in Korg speakers and I would very much recommend them. The positioning of the speakers is crucial though and this is best achieved through trial and error.

Write Your Own Review

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Overall Rating

* Required Fields