01925 582 420

Focusrite iTrack Solo Audio Interface

Stock code: 97556
Focusrite iTrack Solo Audio Interface

Rollover image to zoom in View large Image


  • Perfect for recording with great quality on an iPad
  • Also compatible with PC and Mac
  • Uses a Focusrite mic pre-amp for pristine sound quality
  • Two channels - XLR and 1/4 inch jack inputs with independent gain
  • Headphone and phono out

Want to record your demos on the move with minimal fuss and excellent sound quality? The Focusrite iTrack Solo may just be the answer to your prayers. Ideal for the growing number of musicians using iPads to create music, this interface puts the focus on sound quality by using top grade preamps found in other top Focusrite interfaces.

Record guitar and vocals simultaneously

The Focusrite iTrack Solo Audio Interface is equipped with two inputs with separate gain dials that let you connect guitar and microphones separately, great for recording a live performance for editing later on down the line. "Halo" style rings around the gain dials are fitted for easy to see signal status and to make sure your signal isn't clipping. The large dial on the front of the Focusrite iTrack Solo controls the level of both the phono speaker outs and the headphone output. A direct monitoring switch lets you direct audio directly from the input to the outputs so you can hear what's going in to the unit with no latency, a practical necessity for good performances. Although very much an iPad focused interface, the iTrack Solo will work on both Mac and PC platforms and includes Ableton Live Lite software, letting you start recording quickly and easily.

ModeliTrack Solo Audio Interface
(H x W x D)
45 x 150 x 100 mm
Connectivity Input:
  • Mic: 1 x XLR
  • Instrument: 1 x Unbalanced 1/4"

  • Monitor Output: 2 x Unbalanced 1/4"
  • Headphone Monitor Out: Front 1/4" TRS x 1
  • 1 x USB 2.0 Port
  • 1 x Device Link port (to connect iTrack Solo to iPad)
Phantom PowerSwitchable 48V Phantom Power
Included Accessories Ableton Live Lite 8
Focustire Scarlett Plug-in Suite
Supported Operating Systems Windows 7 Or 8
Mac OS X 10.7 Or 10.8
iPad: iPad, iPad 2, iPad (3rd Generation), iPad 4 (w/ 30-pin to lightning adapter - Not Included) with iOS 5 or iOS 6
Analogue Input Performance
Frequency Response20Hz - 20kHz +/- 0.2 dB
THD+N0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN)-120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter)
Gain Range+10dB to +55dB
Max Input Level-3dBu
Frequency Response20Hz - 20kHz +/- 0.2dB
THD+N0.003% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise-87dBu (22Hz/22kHz bandpass filter)
Gain Range-10dB to +55dB
Max Input Level-3dBu
Analogue Output Performance
Nominal Output Level0dBFS = +9dBu, unbalanced
Frequency Response20Hz - 20kHz +/- 0.2dB
Noise-87dBu (22Hz/22kHz bandpass filter)
Gain Range+10dB to +55dB
Max Input Level-3dBu
Analogue Output Performance
Nominal Output Level0dBFS = 10dBu, balanced
Frequency Response20Hz - 20kHz +/- 0.2dB
THD+N 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Digital Performance
Clock sourcesInternal clock only
A-D Dynamic Range105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
D-A Dynamic Range105dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
Supported sample rates44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz – Mac and PC
44.1 KHz, 48 KHz – iPad
Input to InputBetter than 90dB
Output to OutputBetter than 90dB
Input to OutputBetter than 85dB
Input Metering
Ring LED lit GreenSignal present (-24 dBFS)
Ring LED lit RedSignal overload (0dBFS), peak held for approximately 1 second

Write Your Own Review

    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Overall Rating

* Required Fields