Marshall JVM215C Guitar Combo Amplifier - 100wStock code: 62672
Rollover image to zoom in View large Image
Out of Stock
- High quality valve amp
- Single 12 inch celestion speaker
- 50 watt
- Included programmable 4 way footswitch for extensive control
- Versatile sound
The Marshall JVM215C all-tube 1 x 12" 50-watt amplifier brings you the full range of Marshall tone, from crisp clean to molten roar! The 2-channel JVM215C gives you six "modes," covering two independent channels with three gain stages, each with its own footswitchable memory. It's a great feature for ultra-flexible onstage switching (via the included dedicated, programmable footswitch unit), plus the primo Celestion G12b speaker provides great tone. Two effects loops, reverb for each channel, a speaker-emulated XLR line out, and two footswitchable master volumes also grace the JVM215C.
Channel switching and more
The JVM2 series amps don't simply give you foots-witchable channels. You get an entire palette brimming with different degrees of distortion, tonality, and effects. The included 4-way switch has five easy-to-read LEDs, making this rig ready for stage use. It's also programmable, so you can set up different combinations of channel, mode (Green, Orange, or Red), reverb level, effects level, and master volume easily. The Parallel/Series effects loops are also switchable on/off. Marshall made sure you'll get the most out of this amp even when your at the front of the stage!
Silence is golden
When on Standby, the JVM2's emulated XLR output is fully operational, allowing you to record in total silence - a godsend for those late night recording sessions!
Every JVM2 is made at the Marshall factory in the tonal heart of England. Time-tested, traditional methods of craftsmanship and construction are combined with the latest advances in modern manufacturing technology, ensuring world class build quality and roadworthiness. Internally, the JVM2 circuitry and layout has been kept to a minimum, ensuring the integrity of the guitar tone and an incredibly low noise floor - this coupled with meticulous valve selection and high tolerance, quality components adds to the all-important reliability factor that is synonymous with the Marshall legend.
From glassy to a roar
Two completely independent channels sounds fine, but this amp gives you so much more than that! Each channel features three footswitchable modes: Green, Orange, and Red. These modes give you different voicings and levels of overdrive ranging from pristine clean to super-saturated, harmonic-drenched, sustain-for-days distorted. Of course, the beauty of this configuration is that you can easily dial in these tones and everything in-between, and access them with the touch of a footswitch.
|Dimensions (W x H x D)||605 x 510 x 265 mm|
|Inputs||1 (+ MIDI)|
|Controls||Volume Gain Bass Middle Treble x 2 Reverb x 2 Channel select x 2 Presence Resonance FX Loop Footswitch / Programme|
|Speaker Size||1 x 12"|
|Valves||Pre Amp: 4 x ECC83 Power Amp: 1 x ECC83, 2 x EL34|