No simple footswitch, the Pigtronix Infinity Remote Footswitch is a dual momentary switch designed to get the absolute most out its parent pedal, the Pigtronix Infinity Looper. Although the looper is awesome on its own, this addition opens up more options; hook them up together and you have remote control over UNDO/REDO and REVERSE, along with a few nice extras.
UNDO/REDO – Not Quite Right? No Problem!
As anyone who has ever used a computer will tell you, the ability to undo a mistake is one of the simplest but probably most used functions, and the Undo switch here allows you to do the same. When in the process of overdubbing, you may have messed up a phrase and want to get rid of it straight away. Rather than starting from scratch and redoing your original loop and all other preceding overdubs, a single button press here will remove the current overdub, leaving the rest of your work intact. PHEW!
If you have finished an overdub but aren’t quite happy with it after listening back, you can press the Undo switch here and the Pigtronix Infinity Remote Footswitch will remove the overdub and store it. If you change you change your mind again and want it back again, no worries, just press REDO and it will be back in place.
REVERSE - ESREVER
Pretty self-explanatory, when the REVERSE button is pressed the audio will play in reverse on the next playback, this can be pressed during the initial recording of the loop to get the reversed version of the audio on the very first playback. Pressing REVERSE whilst currently in REVERSE playback mode will revert the loop back to normal, forward playback on the next loop. You can even press UNDO during REVERSE playback to switch back and forth instantly between forward and reverse playback of the same layer. Press REVERSE and then UNDO before the end of the loop to cancel the REVERSE command completely.
A customer-requested feature that was listened to and implemented into the creation Pigtronix Infinity Remote Footswitch, you can now go straight from recording your loop’s base layer to overdub mode, for fast, seamless loop building. It’s simple as well.
While recording the base layer, just press the UNDO switch to close the initial loop and go straight to overdub with the base layer in place. When you’re done and you want to close the overdub, press the appropriate Loop footswitch on the Infinity Looper.
Clear Loops Instantly
With both or one of your loops stopped, pressing UNDO will instantly erase the loop that is currently active. This leaves you in ALL mode, where you can leave the pedal or clear individual loops by going through the process again.
Another nice addition to the arsenal of the Pigtronix Infinity Remote Footswitch, is Varispeed mode; activated by pressing and holding the REVERSE switch for two seconds. This mode allows you to play the audio back at double or half speed, by pressing the REVERSE or UNDO switches respectively.
Manufacturer Pigtronix Model Name Infinity Remote Model Number PXSPL-R Compatibile With Pigtronix Infinity Looper (PXSPL) Functions UNDO/REDO
Rec > Overdub > Play
Varispeed (pitch up & down) control
Solid, high quality build
- Customer Reviews
Write Your Own Review