Alesis M1 520USB Studio Monitors Pair
Stock code: 66109
Rollover image to zoom in
In Stock
Features
- Two-way, active, bi-amplified pair of reference studio-monitor loudspeakers
- Wide, 56 – 20,000 Hz frequency response
- Five-inch lightweight polypropylene woofer with 50W RMS
- One-inch silk-dome tweeter with 25W RMS
- Integrated USB audio interface with 16-bit, 44.1/48 kHz recording and playback
- Two balanced-1/4" inputs
- Stereo, 1/4" headphone output
- Magnetically shielded for placement near TV and computer monitors
- Low-resonance cabinet with tuned bass port
- Bi-color signal/clip indicator
- Switchable power supply ensures worldwide operation
Uncolored audio reproduction and USB studio interface
The Alesis M1Active 520 USB is a studio monitoring system designed for professional studio use with an internal digital-audio interface. M1Active 520 USB is a pair of active, bi-amplified, two-way reference monitors that play from 20,000 Hz all the way down to 56 Hz to cover nearly all frequencies audible to human ears. You can take digital signal out of your computer via USB and input it to the M1Active 520 USB monitors thanks to their digital input. Priced attractively for any studio's budget, the M1Active 520 USB reference monitors perform with linearity, clarity, and neutrality typically reserved for monitors that cost much more.
Includes
| Style | N/A |
|---|---|
| Size | 5" Bass Driver |
| Free Accessories | No |
| Wattage | 30W |
| Speaker Size | N/A |
| Active / Passive | Active |
| Connectivity | Balanced 1/4" Jack Inputs, USB |
| Effect Type | N/A |
| Storage Type | N/A |
| Mic Type | N/A |
| Power | N/A |
| Polar Pattern | N/A |
| Other | N/A |
| Key Stage | Key Stage 3, Key Stage 4 |
| Manufacturers Link | Alesis M1 520USB Studio Monitors Pair |
| Low-frequency driver: | 5” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil |
| High-frequency driver: | one-inch silk dome with magnetic shielding |
| Frequency Response: | 56 - 20,000 Hz |
| Power: | 50 W / 25 W per channel RMS |
| Signal-to-Noise Ratio: | >90dB weighted |
| Digital Conversion: | 16-bit delta sigma, 44.1kHz or 48kHz sampling rate |
| Inputs: | two balanced-1/4” |
| Polarity: | Positive signal on “+” pin creates forward cone displacement |
| Input Impedance: | 10k ohms |
| Input Level: | -10dBV nominal, balanced |
| Dynamic Range: | >80dB |