Rode M3 Condenser Microphone
Stock code: 56449
Features
- Heavy duty metal body
- Internal capsule shock mount
- Switchable High-Pass Filter @ 80Hz-12dB/Oct
- Three step PAD - Flat, -10dB and -20dB
- Low handling noise
- Heat treated high strength head mesh
- 9V battery power or 24/48V phantom power
- Battery status indicator
- Designed and manufactured in Australia
- Full 10 year warranty*
The RØDE M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the RØDE M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter.
The RØDE M3 Condenser Microphone also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.
| Style | No |
|---|---|
| Size | No |
| Free Accessories | Mic Clip | Windscreen | Soft Case |
| Wattage | No |
| Speaker Size | No |
| Active / Passive | No |
| Connectivity Details | No |
| Storage Type | No |
| Mic Type | No |
| Polar Pattern | Cardioid |
| Wireless | N/A |
| Power | No |
| Key Stage | Key Stage 4 |
| Manufacturers Link | Rode M3 Condenser Microphone |
| Power | P48 (48V), P24 (24V) phantom supply or 9V battery |
| Acoustic Principle | Permanently Polarised Condensor |
| Directional Pattern | Cardioid |
| Frequency range | 40 Hz - 20 kHz |
| Output impedance | 200ohm |
| Signal noise ratio | 73 dB SPL (A - weighted per IEC651) |
| Equivalent noise | 21 dB SPL (A - weighted per IEC651) |
| Maximum SPL | 142dB SPL (@ 1kHz, 1% THD into 1K ohm load) |
| Maximum output voltage | +9.22dBu (@ 1kHz, 1% THD into 1K ohm load) |
| Sensitivity | -40 dB re 1 Volt/Pascal (10 mV @ 94 dB SPL) +/- 3 dB @ 1kHz |
| Weight | 390gm |
| Dimensions | 225H x 33W x 33D (mm) |
| Included Accessories | RM3 stand mount |
| WSM3 windshield | |
| RCM3 case |