The CBA2S Assembly Kit comes equipped with all the elements you need to build your very own Schlagwerk cajon! For any avid percussionist who fancies having a go at their making their own cajon, this is a fantastic idea for a gift at such a reasonable price. Each component that is included with the kit has been carefully cut to make construction a very easy and enjoyable process. The only additional tools you require at home to build the cajon are: a screwdriver, hammer, pencil and ruler.
The first step is building the resonance box, and the included tension belts will come in handy along with a pressing board for the construction to all run smoothly. Schlagwerk instruct you to place the planks facing downwards on the tension belts which should be parallel to one another, apply the adhesive glue (included) to the tongue of the wooden panels, and begin fitting the parts together. Once the parts are aligned and have been put together, you can use a wet cloth to remove any residual glue. After around 20 minutes, the glue should be completely dry.
Schlagwerk supply a template for you to use, ensuring that your resonance box has perfect right angles in the right places. The tension belts will again be useful when strapped and fastened around the box, allowing you to double check the edges are all flush.
Schlagwerk include all the necessary elements that are to be fitted on the interior of the resonance box to produce its superb cajon sound. Using your pencil and ruler, you can mark out where to fit the nails and screws. The Large assembly kit features two snare units, and these have to be placed exactly 6cm apart from one another and from the side panel.
Fitting the front and rear panels to the resonance box completes the construction of your cajon. The Schlagwerk logo should feature at the bottom of the front plate by the base of the cajon. The Assembly Kit comes with sandpaper which you will need for the rear plate and soundhole, and the back panel can be added on last. Throughout the build, you must ensure that the edges are always flush and even, then at the end of the process you can sand the edges to round them off, particularly on the front plate which is to be your playing surface. Finish off by attaching the four feet to the bottom of the resonance box, and your cajon is ready.
Once you have proudly built your new Schlagwerk cajon, it is recommended that you wax or oil the birch wood to protect the wood and keep it in a beautifully playable condition for many years.
Manufacturer Schlagwerk Model CBA2S Cajon Assembly Kit - Large Frontplate Birch Resonating body Birch Dimensions (W x H x D) 30 x 45 x 30cm Finish Natural with Schlagwerk branding
- Customer Reviews
Write Your Own Review