SE Electronics sEUSB2200a USB Condenser MicrophoneStock code: 93411
Rollover image to zoom in View large Image
Out of Stock
- Pro Studio Condenser Mic
- USB bus powered
- Audio via USB
- Incredibly low noise
- Direct headphone monitoring
The SE Electronics sEUSB2200a USB Condenser Microphone takes one of the industries leading studio condenser microphones and gives it a USB interface so you can plug it straight into your computer. This is absolutely perfect for podcasting, and not just for voice or amature use. In many ways the most important feature, which lifts sEUSB2200a above the competition, is its advanced proprietary voltage smoothing circuit, chip and software combination that takes the noisy USB 5v bus power and transform it into phantom power for the condenser capsule, accounting for noise and removing it, rather than amplify it (which is the norm for USB mics). The sE2200a USB is fit for professional use as a studio level condenser mic, and can be used to record virtually any source, with a max. sound pressure level of 130dB so you can record louder instruments too.
If that wasn't enough it also breaks the mold and offers XLR output too so you can use it as a standard microphone!
The ultra-convenient SE Electronics sEUSB2200a USB Condenser features a preamp gain control, and zero latency headphone monitoring directly from the mic. The mic also uses a standard USB to Mini-USB cable so you can easily get replacement cables, so no need to buy any proprietary accessories. There is simply no contest. If you are looking for a USB microphone, without compromising on audio quality, this is it - a genuine studio grade wide diaphragm condensor mic and USB audio interface in one.
|Active / Passive||No|
- Frequency Response: 20Hz-20KHz
- Sensitivity: 14.1mV/Pa -37 ± 1.5dB
- Polar Pattern: Cardioid
- Impedance: ≤ 200 Ohms
- Equivalent Noise Level: 12dB(A weighted)
- Max SPL for 0.5% THD@1000Hz: 130dB
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin