Offering the biggest frequency range and power level of the Yamaha DBR series, the DBR15 Active Loudspeaker offers 1000 Watts of power and the largest set of drivers of the range. Delivering a huge 50 Hz to 20 kHz dynamic range, you can be sure to achieve deep and rich bass and shimmering, sweet treble.
Not only do you get lots of power from the DBR15, you get superb quality too. This is thanks in large to the 15" cone woofer with a 2.5" voice coil, and a 1" throat compression tweeter that power out low and high frequencies respectively. The FIR-X Tuning crossover sends the relevant frequencies to the woofer and tweeter, separating at 2.1kHz for superior definition.
The power amp in the Yamaha DBR15 sends 800W to the woofer and 200W to the HF driver. The power consumption of this efficient unit is 60W when active and 18W when idle. When you really have to turn up the volume, the DBR15 comes with an internal 4-speed fan to make sure that any extra heat is dissipated quickly, thus protecting the internal amp.
The Yamaha DBR15 comes with a all the inputs you need, including 2 XLR/Jack combos as well as stereo RCA inputs. For output, you have a balanced XLR connection.
For easy control, the gain knobs are situated at the side of the relevant input as well as a handy mic/line switch on input 1. There are also easy configuration switches for high-pass filter settings and the D-Contour switch that will alter the sound coming out of the Yamaha DBR15 depending if you want to use it as a PA speaker or monitor.
Finally, the back panel also has clear LED markings to show the status of the Amp. Limit, signal, protection and power can be easily checked at a glance.
Delivering masses of power and a huge frequency range, the Yamaha DBR15 is an ideal active speaker for bands and artists that need plenty of power. The solid unit also comes with twin handles built in for easy transportation. A true workhorse!
Manufacturer Yamaha Model DBR15 Dimensions (WxHxD) 455 x 700 x 378mm Weight 19.3Kg (42.6lbs) Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type Frequency range (-10dB) 50Hz – 20kHz Crossover 2.1kHz: FIR-X tuning (linear phase FIR filter) Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Maximum output level (1m; on axis) 132dB SPL Connectivity Input 1: Combo x1 Input 2: Combo x 1 + RCA pin x 2 (Unbalanced) Output: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Processors D-CONTOUR :FOH / MAIN, MONITOR, OFF Power requirements 100V - 240V, 50Hz/60Hz Power consumption 74W(1/8 Power Consumption), 18W(Idle) Flying and mounting hardware Bottom x 2 (Fit for M8 x 15 mm eyebolts) Pole socket 35mm (Bottom x 1)
- Customer Reviews
Write Your Own Review