The Yamaha MG06 compact mixer combines a neat design, road-ready toughness and studio-ready capabilities. The team at Yamaha have poured all of their experience into this little beauty to offer the highest possible quality interface between your gear and PA and/or DAW.
World class preamps
Each mic preamp features Yamaha's studio-quality discrete class-A D-PRE preamps to give the greatest low-noise/high-gain ratio possible. These cleverly designed preamps utilise an inverted Darlington circuit, which provides incredible power with much lower impedance. What this means to you is that your signal feed will remain unblemished by interference or noise, so all that you capture is a pure mic signal; even if you need to crank up the gain, you won't encounter problems with colouration or distortion. Therefore, you can save a lot of studio time - EQing or fixing any problems - by capturing your recordings clearly from the start.
Phantom power capable
Each mic input includes switchable +48V Phantom Power to keep your condenser mics running at their very best, consistently. There is also a Pad switch to prevent clipping from high-energy sound sources when miked up. Recognising the importance of Compression over your live signal mix, Yamaha have developed a 1-knob control. You can very easily and simply give more bounce to your drums, tightness to bass guitar and cleaner vocals.
The solid, powder-coated metal chassis, is built for the road, whilst every fader, knob and switch feels reassuringly sturdy. If you're looking for an affordable mixing desk for home recording or live sound reinforcement, then the Yamaha MG06 6-channel compact mixing desk is pretty much perfect!
Manufacturer Yamaha Model MG06 Compact Mixer Dimensions (H x W x D) 62 x 149 x 202 mm Weight 0.9kg Connectivity Inputs: Mono[MIC/LINE] x 2 Stereo[LINE] x 2 Outputs: STEREO OUT x 2 Phones x 1 Stereo Bus x 1 Phantom Power +48V Input Channel Functions PAD: 26dB (Mono) High Pass Filter: 80 Hz, 12 dB/oct (Mono) EQ HIGH: (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ LOW (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping Level Meter: 2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB] Total Harmonic Distortion 0.01 % @ +8dBu (20 Hz to 20kHz) GAIN knob: Min, 0.003 % @ +18dBu (1kHz) GAIN knob: Min Frequency Response +0.5 dB/-0.5 dB (20 Hz to 20 kHz) Refer to the nominal output level @ 1 kHz GAIN knob: Min Hum & Noise Level Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150, GAIN knob: Max) Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) Crosstalk -88 dB Power Requirements PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha Power Consumption 12 W Operating Temperature 0 to +40˚C Included Accessories AC Adaptor, Owner’s Manual, Technical Specifications
- Customer Reviews
Write Your Own Review