Seymour Duncan Palladium Gain Stage Pedal - Black

By focusing beyond just the tonal characteristics of Palladium, we designed an innovative architecture that captures the full-bodied depth and character previously unattainable in an effects pedal.

You can use it with a power amp or a clean guitar amp to create your ultimate high gain signature sound, and replicate your favourite classic and high gain amp tones. Or use it in front of a distorted amp to tighten up the attack for rhythms or to increase sustain and saturation for solos. However you choose to use Palladium, we hope you hear and feel the impact of great tone, body and depth in your unique sound.

Palladium features three gain stages: a gain stage to control the overall saturation, a resonance control for low frequency gain shaping and a boost control that adds overdrive to the beginning of the signal path. These three gain stages allow for a versatile range of tones, from classic rock at lower settings to modern metal at higher gain settings. The pedal also offers a comprehensive EQ, with bass, treble, presence and sweepable midrange-frequency control, so you can make Palladium sound perfect with any amp.

• Type of circuitry: Low noise op amps and germanium clipping diodes
• Bypass: True hard-wire bypass
• Control Functionality:
• Bass: Sets amount of bass boost or cut
• Mid Level: Sets amount of mid frequency boost or cut
• Mid Freq: Sets location of center frequency of mid boost or cut.
• Treble: Sets amount of treble boost or cut
• Presence: Sets amount of boost or cut above the treble frequency range
• Level: Sets the output signal level
• Gain: Sets the amount of gain at high frequencies from 42.5dB to 71dB
• Resonance: Sets the amount of gain at low frequencies from 41.5dB to 66dB
• Boost Knob: Sets the amount of additional gain provided by the Boost footswitch
• Boost Footswitch: Engages the Boost function
• Input Impedance: 500K ohms
• Output Impedance: 2.8k ohms
• Gain Range: 42.5dB to 71dB
• Resonance Gain Range: 41.5dB to 66dB
• Boost Gain: 25dB
• Noise Referred To Input: <-124 dBV, 400 Hz to 20 kHz
• Tone Control Response:
  Bass - 100Hz center, +/-15dB boost/cut
  Mid - 255Hz to 1100Hz, +/-12db boost/cut
  Treble - 2.7kHz center, +/-13dB boost/cut
• Power: External 9 volt - 18 volt regulated DC adapter (centre pin negative) drives internal 24V supply.
  We recommend a good quality 18v DC adaptor for best results.