The Alto Truesonic TS212W Active PA Speaker with Bluetooth harnesses the benefits of wireless audio through a massive 800-watts of power produced from the built in efficient class D amplifier complimented by cutting-edge design. Stream audio directly from your iPad, iPod, iPhone or any other bluetooth audio-equipped compatible device such as a laptop directly to the TS212W effortlessly.
The TS212W is also equipped with 2 Mic/Line Female XLR – 1/4” jack combo inputs as well as Bluetooth and have independent gain controls so any audio source needed can be used. Should you need an alternate EQ setting, you don't need to be a sound engineer thanks to the built-in contour EQ switch. The signal can then be fed out to another speaker via the XLR output.
Driven with clarity
The 12” LF driver and 1” HF driver are protected behind a full metal grille that protects the unit from anything that comes its way. This is attached to an ergonomic and lightweight trapezoidal cabinet with handles that can be taken to any venue needed. The Truesonic TS212W features standard 36mm pole mounting insets at the bottom and also four M10 rigging point so whether you need to fly, pole mount or use as floor monitors, the TS212W can be used anywhere you need it.
Economical and powerful
The use of a class D amplifier integrated into the cabinet means that you get a highly efficient, lightweight amplification system that generates more sound than heat and gives plenty of punch to your mix. Whether you're performing at a wine bar, house of worship or any other small to medium sized venue, the Alto Truesonic TS212W Active PA speaker with Bluetooth provides all the power and versatility you need.
Manufacturer Alto Model Truesonic TS212W Active PA Speaker with Bluetooth System Power Rating 550W continuous, 1100W peak Class D Connectivity 2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR Frequency Range (-10 dB) 54 Hz - 20 kHz Frequency Response (±3 dB) 65 Hz - 19 kHz Maximum Sound Pressure Level (SPL) @ 1m 125 dB peak, 122 dB continuous -6 dB Nominal Coverage (80 / 100 H x 60 V (degrees)) Active Crossover 2.5 kH Speakers Transducer Low: 12” Woofer, with 2” voice coil Transducer High: Neodymium compression driver, 1” exit with 1” voice coil Wireless Wireless Connectivity: Bluetooth (A2DP) Wireless Range: Up to 30' Input Control Line / Mic -infinity to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms Input Power 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz) Controls Volume 1 + 2, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch, Contour
Write Your Own Review