Following on from the HeadRush Pedalboard and Gigboard comes the HeadRush FRFR-108 Full-Range, Flat-Response Powered Guitar Cabinet that's designed to perfectly complement the HeadRush Pedalboard or any other multi-FX amp modeller.
Perfect On-Stage Monitoring
The HeadRush FRFR-108 houses a specifically-voiced 8-inch woofer and a high-frequency compression driver that gives you an articulated and clear response without anything artificial getting in between you and your tone. With a Contour EQ switch the FRFR-108 will cut through ambiguous on stage sound to ensure perfect monitoring every time.
The HeadRush FRFR-108 gives you 2000 watts of peak power that is suitable for any sized venue. Delivering clarity of sound with plenty of punch and headroom the FRFR-108 works as a floorboard monitor or your main amplifier ensuring your carefully modelled amp sounds aren't coloured by the limited frequency response of a traditional amplifier or PA speakers.
The FRFR-108 gives you plenty of options for connectivity no matter what the situation. The 2 XLR/TLS 1/4 inch combo inputs have their own volume controls and clip indicators allowing you to amplify and mix two separate signal sources. There is also a Ground-Lift switch to eliminate any undesirable noise at venues making sure you sound your best. The XLR output allows you to send your signal to any front of house equipment you encounter on the road.
Manufacturer HeadRush Model FRFR-108 Full-Range, Flat-Response Powered Guitar Cabinet Output Power 2000 W (peak, 1300 LF + 700 HF)
1000 W (continuous RMS, 650 LF + 350 HF)
Drivers Low-Frequency: 8.0-inch (203mm) driver, 2.5 inch (65mm) high temperature voice coil
High-Frequency: 1.4-inch (35mm) neodymium driver with precision waveguide
Crossover Frequency 2.5KHz Maximum SPL 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m) Frequency Response 62Hz - 20kHz (+3dB) Frequency Range 52Hz - 22kHz (-10dB) Horn Coverage 90 horizontal x 60 degrees vertical (nominal) Equalization Contour switch with low and high frequency + 3dB boost Connectors 2 x XLR/TRS 1/4-inch (6.35mm) combo inputs
1 x XLR link output
1 x IEC power cable input
Controls Power switch, 2 x volume control knobs, EQ contour switch, ground-lift switch Protection Electronic clip, thermal & transducer overdrive Power Input Voltage 100 V~, 110 - 120 V~, 220 - 240 V~; 50/60Hz (switchable) Fuse 100-120V T10AL AC250V 220 - 240V T5AL AC250V Mounting Standard 36mm pole socket Dimensions 17.1 x 10.1 x 9.6-inch
434 x 256 x 245mm
Weight 20.2 lb
Write Your Own Review