The HeadRush FRFR-112 Powered Guitar Cabinet gives a full-range and flat-response sound that's designed to perfectly complement the HeadRush Pedalboard, Gigboard and Looperboard as well as any other multi-FX amp modeller.
Perfect On-Stage Monitoring
The HeadRush FRFR-112 houses a specifically-voiced 12-inch woofer and a high-frequency compression driver that gives you an articulated and clear response without anything artificial getting in between you and your tone. With a Contour EQ switch the FRFR-112 will cut through ambiguous on-stage sound to ensure perfect monitoring every time.
The HeadRush FRFR-112 gives you 2000 watts of peak power that is suitable for any sized venue. Delivering clarity of sound with plenty of punch and headroom the FRFR-112 works as a floorboard monitor or your main amplifier ensuring your carefully modelled amp sounds aren't coloured by the limited frequency response of a traditional amplifier or PA speakers.
The FRFR-112 gives you plenty of options for connectivity no matter what the situation. The 2 XLR/TLS 1/4 inch combo inputs have their own volume controls and clip indicators allowing you to amplify and mix two separate signal sources. There is also a Ground-Lift switch to eliminate any undesirable noise at venues making sure you sound your best. The XLR output allows you to send your signal to any front of house equipment you encounter on the road.
Get the HeadRush FRFR-112 Powered Guitar Cabinet to ensure that your perfectly sculpted sound is delivered with sonic clarity and powerful punch when you play live.
Manufacturer HeadRush Model FRFR-112 Full-Range, Flat-Response Powered Guitar Cabinet Output Power 2000 W (peak, 1300 LF + 700 HF) Maximum SPL 127 dB (peak) Frequency Response 62Hz - 20kHz (+3dB) Equalization Contour switch with low and high frequency + 3dB boost Connectors 2 x XLR/TRS 1/4-inch (6.35mm) combo inputs
1 x XLR link output
1 x IEC power cable input
Controls Power switch, 2 x volume control knobs, EQ contour switch, ground-lift switch Protection Electronic clip, thermal & transducer overdrive Mounting Standard 36mm pole socket Dimensions 17.1 x 10.1 x 9.6-inch
434 x 256 x 245mm
Weight 20.2 lb
Write Your Own Review