KRK VXT4 Studio Monitor - Single

Product ID: 65034

Reviews(s) Add Review

Currently out of stock

Please Call 01925 582 420 for Availability

FINANCE  from £12.77 per month
Currently out of stock

Please Call 01925 582 420 for Availability

  • ABS Foam enclosure and front firing radiused non-parallel ports
  • Radiused enclosure edges eliminate diffraction and phase distortion
  • Silk domed tweeter facilitates fast transient response
  • Woven kevlar cone offers high strength to weight ratio
  • Proprietary woofer design optimises consistent performance
  • Multiple protection circuitry protects against transients in the signal
  • Ground lift aids the resolving of hum and buzz caused by ground loops


The KRK VXT 4 features a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a wider “sweet spot”.

True silk tweeter

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression — enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

ModelVXT4 Studio Monitor - Single
Dimensions (H x W x D) 256 x 186 x 177 mm / 10 1/16 x7 1/3 x 7 inches
Shipping Weight14 lbs
  • Woofer: 4" Woven Kevlar
  • Tweeter: 1" Silk Dome NEO
  • XLR-1/4" TRS Combo
  • 10k Ohm Balanced
  • Pin 1 + Sleeve = Ground
  • Pin 2 + Tip = (+) High
  • Pin 3 + Ring = (-) Low
Amp & Fusing
  • HF: 15 Watts
  • LF: 30 Watts
  • 2.0A 100VAC 50HZ
  • 2.0A 110-120VAC 50/60Hz
  • 1.0A 220-240VAC 50/60Hz
Frequency Response56Hz - 22kHz +/- 2dB
Max Peak SPL107 dB
Amplifier ClassClass A-B
Power Output45W
High Frequency15W
Low Frequency30W
Input Impedance (Ohms)10 K Ohm balanced
System Volume(-30dB - +6dB)
Auto Mute(on / off)
IndicatorsPower, Clip, Limit
Indicator ControlClip Indicator (On / Off / Limit)
Enclosure ConstructionStructural Foam
FinishBlack Textured Paint
Port ConfigurationFront firing slot port
Compatable OmniMount20.5 WBX

0 Reviews(s) Add Review

Write Your Own Review

Write Your Own Review

Overall Rating