KRK speakers are widely known around the world for the phenominal clarity and sound, and would you believe it, KRK have done it again with another fantastically built, powerful precision sub-woofer. If you require ultra-accurate bass extension and maximum sound level then the KRK12sHO is a great no-compromise solution for your studio. A versatile sub that can be used in any space that allows you to enable accurate mixing of lower frequencies.
The 12” woven Kevlar high performance woofer is powered by a 400-watt Class A-B amplifier so there's plenty of power on tap. The KRK12sHO has full and extensive bass management complete with full phase adjust and reverse, LFE input capability, internal and deflatable limiter and both balanced and unbalanced inputs. Further to this, a foot pedal can be plugged in to remotely bypass the sub.
Whether you are mixing a high energy track with heavily implemented subsonic frequencies or attempting to pick out unwanted low frequency components such as microphone rumble or exterior noise the KRK12sHO delivers. In a surround sound configuration sub-woofers have to replicate the bass for 5 or more channels as well as the demanding bass for the LFE channel, this is a challenge that the KRK12sHO can handle with ease.
Manufacturer KRK Model 12sHO Active Subwoofer Configuration Front loaded, vented subwoofer System type Active Subwoofer Low-Frequency 12" woven Kevlar woofer Frequency Response 29.2Hz - 60Hz - 160Hz (left / right inputs).29.1Hz - 211Hz (LFE input) Max Peak SPL 123 dB Amplifier Class Class A-B Power Output 400 Watts Continuous at 1% THD+N at 100Hz SNR (signal to Noise Ratio) 92dB Amplifier Distortion (THD+N) Less than or equal to 0.1% at -3dB of Max Power Output 20Hz - 200Hz Input Impedance (Ohms) 10 kΩ Balanced or unbalanced Ground Lift On / Off Low Pass Frequency 60Hz to 160Hz HPF bypass with footswitch only Footswitch Included Phase Rotatable Phase + Polarity Switch System Volume -30dB to +6dB Indicators Power, protection, limiter Input Connectors Balanced XLR for Left and Right Inputs LFE input Balanced XLR Output Connectors Stereo Balanced XLR for left and right, full range with foot switch engaged, 80Hz HP without foot switch engaged. AC Power Input Selectable 110V-120V / 220V-240V Enclosure Construction 18 mm and 36mm reinforced MDF Finish Textured Paint Port Configuration Front Firing Quad Concentric Slot Ports
Write Your Own Review