As the name suggests, the Neat King Bee Cardioid Condenser Microphone is at the absolute top of ots class. With Custom A grade electronics built into it's stylish, light yet robust frame, the Neat King Bee performs without compromise.
The gold-sputtered capsule of the Neat King Bee is capable of capturing frequencies from 16Hz right through to 20kHz. This equates to absolutely every characteristic of your voice or instrument being captured with no blemishes. Vocals, flutes, strings and much more will record with zero noise.
The Neat King Bee is also extremely good with high sound pressure levels so you can feel free to use it to capture drums, brass or even guitar and bass amps cranked up to 11. Whatever you decide to record, you can be assured that what you hear from the source, is the recording you'll get.
In your hive
The Neat King Bee Microphone requires a +48V phantom power DC input which you will find on most audio interfaces and mixing desks so you can be assured this little workhorse will integrate into your existing setup with no fuss.
To ensure that you get the best recordings out of the box, Neat Microphones have even included the 'honeycomb' pop filter to eliminate unwanted wind noise. Also in the box is the 'beehive' custom built shockmount which will keep the King Bee extremely stable to capture your audio with absolute precision.
Manufacturer Neat Microphones Model King Bee Weight 785g Transducer Type 34mm Centre Terminated Condenser Capsule, With Extra Polerization Polar Pattern Cardioid Frequency Response 16Hz - 20kHz Sensitivity 26.0mV/Pa at 1kHz (1 Pa=94dB SPL) Output Impedance 150 ohms Rated Load Impedance 1k ohms Maximum SPL 140 dB SPL (2.5 ohms, 0.5% THD) S/N Ratio 89 dB-A (IEC 651) Noise Level 6 dB-A Dynamic Range 134 dB (@ 5.5k ohms) Power Requirements +48V DC Phantom Power
Write Your Own Review