The NEO Acoustics 15A Speaker and Sub15 Subwoofer Bundle contains two NEO Acoustics 15A full-range loudspeakers, NEO Acoustics Sub12 Active Subwoofer, Mackie ProFX8v2 Professional 8 Channel Mixer, Essentials Speaker Stands with Bag, two Stagg SAC10PXM DL 10m XLRM to Mono Jack cables and two Stagg SMC10 XLR Leads, you have everything you need to get setup with a live sound system.
NEO Acoustics 15A Active PA Speaker
The NEO Acoustics 15A Active PA Speaker is a powerful and lightweight full-range loudspeaker system designed for small to medium-sized venues. Coming in at a fantastic price point these speakers are rugged enough for the road and deliver a full and natural sound.
With a Class-D amplifier, the NEO Acoustics 15A packs 800W of peak power, 400W RMS (LF300W/HF/100W) making it more than adequate for small and medium-sized venues. The 1x15-inch woofer gives you clarity of sound and will translate your audio with power and presence and a 2.2kHz crossover ensures your mix will cut through without muddiness. On the rear of the speaker, there are Bass and Treble knobs to allow you to sculpt your sound further, perfect for when you're playing a variety of venues.
With two input channels, you get a variety of connectivity options. On Channel 1 you have a line/XLR in and an XLR mix out, perfect for a variety of instruments, mixers and consoles. Channel 2 has an XLR in alongside RCA in giving you further connectivity options. With built-in Bluetooth, the NEO Acoustics 15A speaker lets you pair any Bluetooth capable device to the speaker, ensuring no matter what the situation you're always armed and ready.
The NEO Acoustics 15A is housed in a rugged plastic casing that's more than adept at dealing with life on the road. It has a built-in carry handle on the side and can be used as either front of house or an onstage wedge monitor. Whether it's a pub, a club, rehearsal space or anywhere else clarity of sound is needed, the NEO Acoustics 15A Active PA Speaker will be a welcome addition to any sound system.
NEO Acoustics Sub15 Active Subwoofer with DSP
The Neo Acoustics Sub15 Active Subwoofer with DSP is an active full range subwoofer with a 15-inch Woofer that packs a whopping 550W RMS of Amp Power. With a plywood and MDF housing that's been sandblasted this Subwoofer is rugged enough for the road and powerful enough to deliver some serious low end.
The Class-D Amplifier gives you a room-shaking 550W RMS and Peak Power of 1200W, meaning the NEO Acoustics Sub15 Active Subwoofer can comfortably handle a variety of scenarios giving you a dynamic and natural sound with minimal distortion. A frequency response between 30Hz and 200Hz gives plenty of low-end scope, great for when you want to feel that sub depth bass. The onboard DSP has powerful 24-bit processing with 48 kHz Sampling Frequency to ensure the earth-shattering bass is delivered with clarity. The SPL of 124dB means this sub's presence will be felt just as well as it is heard.
Constructed with durability in mind, the Plywood/MDF housing has been sprayed on the surface and sandblasted to ensure you can rely on this sub when you take it on the road. Even with the constant load in and load out the enclosure will make certain the electronics are secure and the unit will keep looking pristine.
Mackie ProFX8v2 Professional 8 Channel Mixer
Boasting eight channels for you to play with, the ProFX8v2 features four Mackie Vita preamps, which provide incredibly quiet signal routing that makes them perfect for real-time live sound applications. Pushing them at full-pelt is no problem for these beauties, responding sweetly to both dynamic and condenser inputs, whilst offering 48 VDC phantom power to all mic channels simultaneously.
As well as the mic inputs, there is a range of balanced and unbalanced 1/4-inch inputs, as well as a Hi-Z input that allows you to directly connect a guitar, bass, or other high impedance instruments.
Built into the ProFX8v2 is the ReadyFX digital effects engine, which gives direct access to 16 awesome reverbs, delays, and choruses that enable you to give any performance the lift it deserves. The control interface allows you to easily dial in the desired effect, which is indicated on the LCD display. The effect can then be muted, the level of the effect attenuated using the FX Master knob and even sent to the monitor mix using the FX to MON knob.
As well as ReadyFX, there is a Graphic EQ that allows you to attenuate and sculpt the mains or monitors with exceptional flexibility. Along each channel strip, there are three Hi, Mid, and Low EQ knobs, which allow you to shape and carve out the signal for each input.
Mackie has included a USB port on the ProFX8v2, which allows recording to be sent directly to your DAW of choice for rapid capture during live and studio performances. There are subgroups available, or you can elect to go for a direct stereo Left and Right mix. There is a separate USB input level control for attenuating the signal during playback. Whether you’re at a party, at a gig, or in the studio, you can quickly playback tracks you’ve recorded with ease. There is also a “Break” switch that mutes all channels so that you can easily switch between playing music and routing the channel inputs. Not only that, but Mackie has included Tracktion recording software so that you can start capturing audio in no time at all.
The Mackie ProFX8v2 is built to their legendary high standard of quality, with a solid steel chassis that is reinforced by tough ABS side protection. You can rest assured that wherever your music takes you, your ProFX8v2 is as safe as can be and ready to take on anything that is thrown at it.
Stands and Cables
In the NEO Acoustics 12A Speaker and Sub12 Subwoofer bundle you get a durable set of PA speaker stands from QTX with a black aluminium finish. Great for getting the most out of your PA speakers the stands scan be adjusted from 1m to 1.85m. With a maximum load capacity of 40kg per stand they can also accommodate a wide variety of speakers. Includes a protective bag for convenient transport.
It's no good having all this gear and no way to hook it up but we've got you covered. The SAC10PXM is 10 metres in length and is perfect for amplifier to speaker connectivity. The connectors are designed to create a flush seal in any socket, maximising surface area for a reassuringly secure feel. The cable is screened against unwanted noise or interference, minimising the chance of your recording or PA signal being affected. You also get the Stagg SMC10, which is a strong and long female XLR to male XLR lead. The adapters are designed to take all the abuse that gigging brings whilst the massive length of the cable gives you total freedom to move about on stage.
With an exhaustive list of quality components this bundle takes the hassle out of shopping around for individual items and gives you everything you need to get your PA system up and running, whether you're travelling around doing shows or you need a solution for your venue or rehearsal space you'll find everything you need in one handy package.
Manufacturer NEO Acoustics Model 15A Active PA Speaker Frequency Response 50Hz-20kHz Sensitivity (1m/1w) 93dB Impedance 4 Ohms Woofer 15-Inch, 50mm Driver 1-inch Titanium SPL 121dB Bluetooth Yes EQ Treble, Bass Amp Type LF Class D / HF Class AB Amp Power LF300W / HF100W RMS Peak Power LF600W / HF200W RMS THD < = 0.05% Protections Over Temp, Over Load, DC Protect, Over Voltage, Low Voltage, Soft start Crossover 2.2kHz Dimension 480 x 430 x 780mm Weight 15.9kg Manufacturer NEO Acoustics Model Sub15 Active Subwoofer with DSP Speaker Type Active SUB Speaker Frequency range 30Hz-200Hz Sensitivity (1m/1w) 96.5dB Impedance 4 Ohms Woofer 15-Inch, 100mm SPL 124dB DSP 48 kHz Sampling Frequency, 24-bit Amp Type Class D Amp Power 550W RMS Peak Power 1200W THD < = 0.1% Protections Over Temp, Over Load, DC Protect, Over Voltage, Low Voltage, Soft start Crossover 150Hz Dimension 610 x 540 x 620mm Weight 36kg Manufacturer Mackie Model ProFX8v2 Professional 8 Channel Mixer With USB Dimensions (H x W x D) 178 x 396 x 455 mm Weight 4.5kg Noise Characteristics Equivalent Input Noise (EIN): 150 Ohms source impedance, 20 Hz to 20kHz
Mic in to FX send, max gain: -128dBu
Mic in to insert send out, max gain: -125dBu
Mic in to insert send out, max gain: -128dBu
Residual Output Noise (EIN) All outputs, master levels off, all channel levels off: -95dBu
All outputs, master levels unity, one channel level unity: -85dBu; -80dBu
Frequency Response Mic input to any output (gain at unity, +0dB / -1dB): 20 Hz to 40 kHz
20 Hz to 30 kHz
Distortion (THD+N) 20 Hz to 30 kHz (gain at unity, +0dB / -1dB)
Mic in to Main out (+4dBu output) <0.01%; <0/3%
Attenuation and Crosstalk Adjacent Inputs at 1kHz: -80dB; -90dB
Inputs to Outputs at 1kHz: -80dB
Fader Off at 1kHz: -80dB; -75dB
Mute Switch / Break Switch Mute at 1 kHz: -90dB; -100dB
Common Mode Rejection Ratio Mic In to Main Out, max gain, 1kHz: 70dB Maximum Levels All inputs: +22dBu
Main Out: +22dBu
Main Out XLR: +28dBu
All other outputs: +22dBu
Impedances Mic In: 3.3 k Ohms; 3.8 k Ohms
Channel Insert Return: 10 k Ohms
All other inputs: >20 k Ohms
Tape output: 1 k Ohm
Phones output: 25 k Ohms
All other outputs: 120 Ohms (unbalanced); 240 Ohms (balanced)
Equalization Low: +/- 15dB at 80 Hz
Mid: +/- 15dB at 2.5 kHz
High: +/- 15 at 12 kHz
Low Cut Filter: 18dB/octave at 100 Hz
Digital Effects Inputs/Outputs: Mono input / Stereo output
Number of Presets: 16
Meter Main L/R Mix
Two columns of 12 segments each:
OL(+20 dBu), +15, +10, +6, +3, 0 (0 dBu), -2, -4, -7, 10, -20, -30
Channel OL LED
Measured post-EQ, pre-fader
(-3dB before channel clipping): 18dBu
Graphic EQ Frequency Centres (5-band): 80, 250, 800, 2.5k, 8k
Frequency Centres (7-band): 125, 250, 500, 1k, 2k
Gain: +/- 15dB
Assignable to Main or Monitor, bypassable
USB Format: USB 1.1
Inputs/Output: Stereo Input/Stereo Output
Analogue/Digital/Analogue: 16-Bit, 44.1kHz / 48 kHz
Phantom Power 48 VDC to all Mic channels simultaneously AC Power Requirements Power Consumption: 20 watts
Universal AC Power Supply: 100 - 240 VAC, 50 - 60 Hz
Class I Hard-Wired Wall Wart: 12 VDC at 1.5A
CLass II Detachable Line Cord
Operating Temperature: 0 - 40 degrees celsius
Maximum Voltage Gain (EQ Flat) Mic Input Channel to Insert Output: 50dB
Tape Output: 60dB
USB Output: 50dB; 60dB
1/4-inch Main Output: 70dB
XLR Main Output: 76dB
Monitor Send: 76dB; 81dB
FX Send: 75dB; 90dB
Mono Line Input Channel to Insert Output: 30dB
Tape Output: 40dB
USB Output: 30dB; 40dB
XLR Main Output: 56dB
Monitor Send: 56dB; 61dB
FX Send: 55dB; 70dB
Stereo Line Input Channel to Tape Output: 30dB
USB Output: 30dB
XLR Main Output: 46dB
Monitor Send: 46dB; 51dB
FX Send: 45dB; 60dB; 55dB
Tape Input to Main Output: 30dB
XLR Main Output: 36dB
USB Input to Main Output: 30dB
XLR Main Output: 36dB
Stereo Return to Mon Output: 30dB
XLR Main Output: 26dB
Write Your Own Review