The Neumann KH 80 DSP Active Studio Monitor Speaker is a feature packed compact near-field monitor that features some incredible innovation that's designed to give you an sound that's organic and defined so that you can produce the best possible mix. The KH 80 DSP shows what can be achieved when the latest in acoustic and electronic simulation and measurement technologies are combined.
The KH 80 DSP features an in-house simulated driver with metal grille and a powerful alloy fabric tweeter dome. This means that the KH 80 is capable of delivering a frequency range of 53Hz to 22kHz so that no part of your music will be missed in the mix. To compliment this, the compact polycarbonate composite cabinet also features a long-throw sandwich cone bass driver that helps deliver a rich, detailed bass even at higher volume levels without distortion.
The output of the driver and tweeter are controlled by a sophisticated DSP engine with network control via ethernet and the Neumann Control software. This clever DSP system optimises the output and gives you greater deep-editing of your sound - a feature that is not normally seen on a monitor of this price.
The Neumann KH 80 DSP also features physical controls for auto-standby, acoustic control for adjusting low/mid frequencies, output levels abnd input gain so you will be able to calibrate the KH 80 DSP to your environment as soon as you're all plugged in. The audio input is handled by a high quality, balanced XLR input so you get the best audio input to work with.
The Neumann KH 80 DSP Active Studio Monitor Speaker is so versatile and impressive that you will often find them in some of the worlds most acclaimed studio's, outside of live broadcast trucks and even in audiophile's front rooms. This is testimony of the high precision audio that Neumann are so capable of delivering. For your mixing and listening pleasure, the Neumann KH 80 DSP is extremely difficult to beat.
Make Neumann Model KH80 DSP A G (Single) Dimensions (HxWxD) 233 x 154 x 194 mm (9 1/8" x 6" x 8 5/8") Weight 3.5Kg Bass amplifier output power (THD+N, 0.1%, 10%) 90 W, 120 W Treble amplifier output power (THD+N, 0.1%, 10%) 50 W, 70 W Controller design Digital, active Crossover Frequency 1.8 kHz Crossover Slope 48 dB/oct, 8th order with phase correction Equalization - Low Mid 0, -1.5, -3, -4.5 dB Equalization – via Neumann Control Software 8 x full parametric IIR + low / high shelf global balance FIR phase correction Linear phase (170 Hz ... 16kHz, +/- 45°), Analog emulation Latency A-D-A – linear phase, analog emulation mode 2 ms, 0.65 ms Protection circuitry Independent soft clip, peak and thermo limiters for woofer and tweeter. Woofer excursion limiter Infrasonic filter - frequency; slope 61 Hz; 12 dB/oct Input XLR / 6.3 mm (¼”) Jack, analog electronically balanced Impedance 14k Ohms Input gain control (sensitivity) 0 dB to -15 dB Output level control 94, 100, 108, 114 dB SPL Display Indicator Normal operation: Neumann logo “White” Identification: Neumann logo “Rosé” Limit / clip / errors: Neumann logo “Red” Included Accessories 1x KH 80 DSP A 1x Mains cable (European, UK, US, or CCC and KC) 4x Self-adhesive feet 1x Getting Started Quickly guide 1x Safety booklet
Write Your Own Review