If you're new to the decks and you wish to take your sound up a step, the Ortofon Concorde Pro S Cartridge is well worth looking into. Complete with an impressive 20Hz to 18kHz pickup range and a spherical needle, the Pro S Cartridge is a great all-rounder that provides a consistent sound.
All round sound
The Ortofon Concorde Pro S Cartridge has a large audio pickup range which ensures that your vinyl will sound at its best. Lower quality needles can sometimes "blur" the sound and fade away over time making your mix sound much less dominant than it could. The Pro S will make sure your beats are punchy, your basslines deep and your mids and treble crisp and clear.
With a suggested tracking force of 4g, the Pro S is weighted just so for all DJ styles. Should you be into scratching or back cueing, no problem. For the DJ that likes to keep it clean and mix all night long, the Pro S will support you without issue.
If you wish to add an upgrade to your existing deck that can stand the test of time and ensure you get the best results, look no further than the Ortofon Concorde Pro S Cartridge.
Manufacturer Ortofon Model Concorde Pro S Cartridge Output voltage at 1000Hz, 5cm/sec 5 mV Channel balance at 1kHz 2 dB Channel separation at 1kHz 20 dB Channel separation at 15 kHz 15 dB Frequency range at -3dB 20-18.000 Hz Frequency response 20-18.000 Hz +/-2 dB Tracking ability at 315 Hz at recommended tracking force 70 μm Compliance, dynamic lateral 7 μm/m N Stylus type Spherical Stylus tip radius R 18 μm Tracking force range 3,0-5,0 g (30-50 mN) Tracking force recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge weight 18,5 g OM Cartridge weight 5,0 g
Write Your Own Review