The Ortofon Concorde Scratch Stylus is the only replacement for your treasured Ortofon Concorde Scratch Cartridge. Due to the robust nature of the stylus it's not often you will have to change but it's always handy to keep to hand!
Full frequency pickup
The Concorde Scratch Stylus is capable of picking up the full human auditory range of 20Hz to 20kHz at -3dB and fires it out through a staggering 7 mV output voltage. Your scratching will have never sounded so punchy and clear over the top of your mix.
Reinforced for durability
The spherical needle of the Ortofon Concorde Scratch Stylus delivers rock solid bass and greatly extended highs so when you're not practising the art of scratching you can play your mixes with total clarity.
For when you need a fresh stylus on your Ortofon Concorde Scratch Cartridge, the Scratch Stylus is here to help you keep the music (and scratching) flowing for many performances.
Manufacturer Ortofon Model Concorde Scratch Stylus Output voltage at 1000Hz, 5cm/sec 7 mV Channel balance at 1kHz 1.5 dB Channel separation at 1kHz 25 dB Channel separation at 15 kHz 15 dB Frequency range at -3dB 20-20.000 Hz Frequency response 20-15.000 Hz +3/-2 dB Tracking ability at 315 Hz at recommended tracking force 80 μm Compliance, dynamic lateral 6 μm/m N Stylus type Spherical Stylus tip radius R 18 μm Tracking force range 3,0-5,0 g (30-50 mN) Tracking force recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF
Write Your Own Review