When the time comes to replace the stylus on your existing Pro S Cartridge, the Ortofon Stylus Pro S is the only choice. Although the needle of the Pro S is very durable it will still need replacing from time to time and the Stylus Pro S is a great low-cost solution.
The benefits of replacing your cartridge
The Ortofon Concorde Pro S Cartridge has a large audio pickup range which ensures that your vinyl will sound at its best. Lower quality needles can sometimes "blur" the sound and fade away quicker making your mix sound much less dominant than it could. The Pro S will make sure your beats are clear, your basslines deep and your mids and treble crisp and clear, all it takes is a bit of maintenance and a stylus replacement.
With a suggested tracking force of 4g, the Pro S is weighted just so for all DJ styles. Should you be into scratching or back cueing, no problem. For the DJ that likes to keep it clean and mix all night long, the Pro S will support you without issue.
For breathing new life back into your beloved Ortofon Pro S Cartridge, a spare Stylus Pro S is certainly a very handy thing to have.
Manufacturer Ortofon Model Concorde Stylus Pro S Output voltage at 1000Hz, 5cm/sec 5 mV Channel balance at 1kHz 2 dB Channel separation at 1kHz 20 dB Channel separation at 15 kHz 15 dB Frequency range at -3dB 20-18.000 Hz Frequency response 20-18.000 Hz +/-2 dB Tracking ability at 315 Hz at recommended tracking force 70 μm Compliance, dynamic lateral 7 μm/m N Stylus type Spherical Stylus tip radius R 18 μm Tracking force range 3,0-5,0 g (30-50 mN) Tracking force recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge weight 18,5 g OM Cartridge weight 5,0 g
Write Your Own Review