The new SE Electronics X1 A Condenser Microphone is SE's entry point Microphone for their acclaimed X series of microphones. Delivering nothing but superb clarity, this brilliant condenser microphone gets some of its features straight from the X1 itself.
Large capsule clarity
The rugged design of the X1 A houses a fixed-cardioid capsule, with a 20dB pad and low-cut bass filter. The grille is made out of steel to give you total reassurance when handling the mic. The new rubberised black paint has been carefully applied to give a supportive feel in the hand, whilst lending itself well to during recordings due its noise damping abilities, which help to minimise any resonant frequencies in the microphone.
The large-diaphragm design makes the X1 a fantastic vocal mic, thanks to its linear frequency response. The timbre of both male and female singers is captured beautifully, allowing an appropriate amount of headroom in the upper frequency range to give a sweetly rounded quality.
Ideal for any audio source
The max SPL of 140dB will put you at ease when recording directly in front of amplifiers and percussion instruments. Whether pointed directly at the source, offset or distance miked, you can rest assured that the X1 will perform exquisitely every time.
If you need a professional grade microphone but at a low cost, then the SE Electronics X1 A Condenser Microphone is sure to astonish you. As soon as you begin to use it, you'll realise why SE Electronics have such a respected name in the microphone industry.
Manufacturer SE Electronics Model SE-X1 A Cardioid Condenser Microphone Dimensions (H x W x D) 470 x 419 x 211 mm Weight 1kg Frequency Response 20Hz ~ 20 KHz Sensitivity -32 dBV/Pa (25.1mV/Pa) Polar Pattern Cardioid Impedance 200 Ohm Equivalent Noise Level 16 dB (A Weighted) Max SPL for 0.5% Total Harmonic Distortion @ 1KHz 125 dB Power Requirement Phantom Power 48V ± 4V Connector Gold Plated 3–pin XLR
Write Your Own Review