The Shure PSM200 In-Ear Personal Monitoring System contains SE112 Sound Isolating Earphones, a P2R Receiver and a P2T Transmixer. With a built in audio limiter, 2 mic/line input channels for mix control and a volume control on the bodypack receiver, this system has everything you need for pro-level monitoring during your live shows.
The Shure PSM200 has several benefits over your typical wedge-style monitoring system in that you'll hear the music at the exact time its played. With traditional wedge-monitors there can be a slight delay in the sound reaching your ear, potentially causing the performance to go out of time. No such issues with these in-ear monitors, the sound is constant and moves with you, unlike with a wedge monitor where the sound will change if you move to the left and right of the monitor. Using the included SE223 In-Ear monitors also cancels out and extraneous noise from the stage, so you can focus fully on the performance and playing in time.
The Shure PSM200 In-Ear Personal Monitoring System is a pro level audio system designed for perfectionist performers who want the best possible live sound. Take your live show to the next level with this kit that includes everything you need for professional live sound.
Manufacturer Shure Model PSM200 PSM 200 Specifications Operating Range (ip to) 100 SE112-GR Specifications Weight 30 g Sound signature: Great sound + deep bass Sensitivity: 105 dB SPL/mW Impedance: 16 Ω Frequency Range: 25 Hz – 17 kHz Cable length: 127 cm Sound Isolation (up to): 37 dB MicroDriver: Single Dynamic Cable type: Fixed Connection Type: Cable P2R Specifications Weight: 100 g Height x Width x Depth: 122.0 × 73.0 × 32.0 mm Battery life lithium: 8 h Battery life alkaline: 6 h RF Sensitivity: -109 dBm, for 12dV SINAD, typical Squelch Threshold: -102 dB SINAD Adjacent Channel Rejection: n/a dB Minimum load impedance: 8 Ω Bodypack Diversity: No Detachable Antennas: No Transmission: Analog Batteries: 9V Receiver Housings:: Molded ABS P2T Specifications Weight: 370 g Height x Width x Depth: 40.0 × 220.0 × 140.0 mm Operating Range (up to): 100 m RF mute: No Detachable Antennas: No Maximum input signal: -5 dBu Input impedance: 1000 Ω Transmission: Analog Rack Hardware: Included Rack Mounts Brackets Included antenna: External 1/4-wave Type of Power Supply: External Functionality: Transmixer Input connectors: XLR, 6,3 mm Output connectors: XLR Transmitter housings: Molded ABS
Write Your Own Review