The Yamaha DXR15 is a powerful but compact active speaker with a 15" driver and many possible applications.
Portability is often at the top of the gigging musicians list of features to consider in a PA speaker. This speaker offers that, alongside durability and convenience, with the option to use the Yamaha DXR15 as a floor monitor. Plenty of power is packed into this beast, featuring a 1100W Class D power amplifier. This is extremely efficient and makes it capable of up to 133dB SPL.
Three Channel Mixer
Letting you connect a range of other gear, the Yamaha DXR15 has an on-board 3 channel mixer section. Channel 1 gives you a single XLR input, great for connecting a single microphone for quick and easy use as a speech amplification system. The second channel is ideal for connecting your mixer to during a live gig, offering two 1/4" jack sockets that can run in either mono or stereo. Finally, channel 3 offers two RCA (phono) sockets. Each channel has its own level control and can be used with the link out feature for easy set up. A DSP section, with EQ settings for several applications and a high pass filter is a great addition.
Many possible uses
Installation, floor monitoring and standard PA / SR usage is all possible with the Yamaha DXR15 active speaker. Rigging points are present so you can safely hang the speaker with industry standard attachments, U brackets are available separately to allow for easy installation, both horizontally and vertically.
Manufacturer Yamaha Model DXR15 Dimensions (H x W x D) 700 x 445 x 380 mm Weight 49.6lbs (22.5kg) Speaker type 15-inch 2-way, Bi-amp powered speaker, Bass-reflex type Frequency Response (-10dB) 49Hz - 20kHz Active / Passive Active Wattage 1100W Nominal coverage Horizontal Axis: 90 degrees Vertical Axis: 60 degrees Components Low Fequency: Diameter:15-inch cone, Voice Coil:2.5-inch, Magnet:Ferrite High Frequency: Diaphragm:1.4-inch, Type: 1-inch throat compression driver, Magnet:Ferrite Crossover FIR-X tuning (linear phase FIR filter) Output power Dynamic:1100W (LF: 950W HF: 150W) Continuous: 700W (LF: 600W HF: 100W) Maximum output level (1m; on axis) 133dB SPL I/O connectors INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1 ), LINK OUT: XLR x 1 Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF Power requirements 100V - 240V, 50Hz/60Hz Power consumption 90W Flying and mounting hardware Top x2, Rear x1 (Fits for M8 x 15mm eyebolts) Pole socket 35mm with 2-way features (0 or 7 degrees)
Write Your Own Review